beyond.com bug
Radius 40 milesradius arrow
Alert Me

We apologize for the inconvenience but the job you are looking for has been filled or it has been removed by the recruiter. For your reference, the original listing is shown at the bottom of this page.


Listed below are the top 10 out of 1,532 listings that are in the same industry and location as the job you were looking for. To see more than 10 listings, click here to search similar jobs in Boston, MA


 
 

May 13

Yoh - Gloucester, MA US

Yoh has a direct hire opportunity for a Senior System Engineer to join our client in Gloucester, MA. Job Responsibilities: The incumbent will support the ...

May 23

Lilliputian Systems, Inc. - Wilmington, MA US

The Senior Manager Test Engineering will be responsible for defining, planning, developing, and executing system and subsystem verification and product validation ...

May 23

Lilliputian Systems, Inc. - Wilmington, MA US

The Sr. Packaging Process Engineer will be responsible for the design of the Back End Packaging of the Generator Chip. The role requires the candidate to design, ...

May 23

Lilliputian Systems, Inc. - Wilmington, MA US

The Software Engineer will be responsible for developing and maintaining software, data and reporting systems for the Backend engineering and operations teams ...

May 23

Lilliputian Systems, Inc. - Wilmington, MA US

As part of the backend manufacturing team the Staff Process Manufacturing Engineer is primarily responsible for developing, implementing and continually improving ...

May 23

Lilliputian Systems, Inc. - Wilmington, MA US

The Systems Product Engineer is responsible for Lilliputian s MPS (Mobile Power Source) System and system components. The scope of skills necessarily involves ...

May 23

Lilliputian Systems, Inc. - Wilmington, MA US

As part of the backend manufacturing team the Senior Manufacturing Test Engineer is primarily responsible for developing, implementing and continually improving ...

May 23

Lilliputian Systems, Inc. - Wilmington, MA US

As part of the backend manufacturing team the Senior Process Manufacturing Engineer is primarily responsible for developing, implementing and continually improving ...

May 23

Lilliputian Systems, Inc. - Wilington, MA US

The Systems Engineer II will be responsible for leading major system design and development projects for a MEMSbased micro fuel cell used to power portable ...

May 23

Lilliputian Systems, Inc. - Wilmington, MA US

Be a key contributor to the leading edge and highly motivated development team at Lilliputian Systems. The Lead Electrical Engineering is responsible for leading ...
 

To view more listings click here to search Engineering Jobs in Boston, MA


For your reference, we have included the original job posting below.




Senior Electrical Engineer - Substation Design


Job Number:41379117
Company Name:Parsons
Job Location:Boston, MA US
Job Categories:Engineering & Architecture
Construction & Extraction


Senior Electrical Engineer - Substation Design

Be Part of a Global Firm Committed to a Sustainable World

Senior Electrical Engineer - Substation Design - Boston, MA OR Syracuse, NY

Parsons offers the stability and recognition of an industry leader coupled with an entrepreneurial spirit. We deliver landmark commercial infrastructure that supports global initiatives in energy, power, renewables, environmental, healthcare, education, communications and capital improvement programs. We are hiring colleagues with a ""can do"" mindset. If you thrive in a high energy environment and on professional challenges, let's get started! Parsons delivers safer, healthier and more sustainable communities.

POSITION OVERVIEW:
Completes a wide variety of difficult engineering assignments, applying electrical engineering techniques and analyses. The Engineer at this level is a fully qualified professional, proficient in the utilization of most engineering theories and practices. Some assignments involve CAE (computer aided engineering)/CAD (computer aided design) applications. Willingness to travel or relocate to supplier, client, or construction site locations, is expected.

SPECIFIC RESPONSIBILITIES:
Performs complex engineering tasks and particularly important engineering work efficiently and accurately.

Extracts engineering information from CAD drawings.

Prepares engineering computations, material quantity takeoffs, estimates, surveys, and designs.

Completes a variety of assignments such as drawings, specifications, and other materials suitable for procurement and construction purposes. Frequently interfaces with other Engineering disciplines as well as other departments.

Prepares detailed requisitions for equipment and materials.

Reviews supplier drawing submittals and performs technical bid analyses.

Prepares and issues specifications, data sheets, and other construction documents.

Provides technical guidance to CAD Designer/Drafters, Designers, and lower-level Engineers working on the same project.

May be required to provide the seal and signature of the professional engineer, as appropriate, ensuring compliance with all applicable codes, regulations, and ordinances.

May act in an advisory capacity to senior management personnel on engineering related matters.

Performs other responsibilities associated with this position as may be appropriate.

Qualifications:
Registered professional electrical engineer in at least one US state is required, additionally NCEES registration is preferred.

• BSEE power systems engineering required. MSEE power systems engineering preferred. Other relevant discipline degrees may be considered acceptable.

• Minimum 8-10 years of post graduate experience in electrical utility transmission and distribution substation engineering and design.

• Substation and switchyard design experience from the initial conceptual / feasibility study and cost estimating phase through detailed design, installation, and startup phases is essential.

• Significant high voltage (up to 500KV) experience in all aspects of substation and switchyard design including advanced power system analysis, one line diagram development, physical design development, equipment specification and procurement, protective relaying, metering, and smart grid applications.

• Extensive experience in the design and installation of new and modified high voltage substation and switchyard systems and equipment.

• Experience integrating sustainable energy generation power sources to substations and switchyards such as solar photovoltaic and wind turbine.

• Extensive knowledge of IEEE, ANSI, IEC, NERC/RFC, and other industry standards as well as NFPA/NEC and other codes applicable to this substation and switchyard work.

• Extensive knowledge of the application of substation and switchyard protection, coordination, control, and metering techniques and commercially available discrete and multifunction electronic metering and relaying systems. Integration of substation, switchyard, and transmission line protective relay schemes. Experience with various vendors' protective relay equipment typically used in transmission line and substation/switchyard protection including SEL, ABB, GE, Areva, Basler, etc.

• Strong power system analysis capabilities to both use and teach the use of advanced power system software tools such as ETAP, EDSA, SKM, CDEGS, etc. in performing short circuit, load flow, voltage drop, and grounding analyses on substations and switchyards of up to 500KV.

• Experienced in the preparation of high, medium, and low voltage substation and switchyard drawings including one line and three line diagrams, physical equipment arrangement plans, grounding and lighting plans, and defining protective relay and metering schemes for high and medium voltage busses and transformers.

• Experienced in the preparation of high, medium, and low voltage substation and switchyard equipment procurement, installation, and testing specifications, bid documents, bid evaluations, and contract management.

• Ability to develop and maintain technical standards associated with substation work.

• Strong oral and written communication skills, strong presentation skills.

Parsons offers an ethical, challenging, diverse, rewarding and fun work experience where enthusiastic, responsible people use their energy, talent and dedication to make a difference in the world.

We provide career growth and development, a competitive compensation and benefits package which includes medical, dental, vision, and life insurance; tuition reimbursement program; credit union membership; Employee Stock Ownership Plan and a 401(k) plan. Parsons is an equal opportunity, drug-free employer committed to diversity in the workplace. M/W/D/V.
Founded in 1944, Parsons, an engineering, construction, technical, and management services firm with revenues of $2.7 billion in 2011, is 100% owned by the Employee Stock Ownership Trust. We conquer the toughest logistical challenges and deliver design/design-build, program/construction management, professional services, and innovative alternative delivery solutions to private industrial customers worldwide as well as to federal, regional, and local government agencies. Parsons is a leader in many diversified markets with a focus on infrastructure, environmental, and defense/security. Currently, more than 11,000 Parsons' employees are engaged in more than 4,500 projects in 50 states and 26 countries. These dedicated workers speak 89 languages collectively, and hold more than 10,300 college degrees and professional registrations. Parsons' employees continue to go anywhere in the world, meet every technical and management challenge, and persevere until the job is done.

Beyond.com is a Registered Trademark of Beyond.com, Inc.
Beyond.com Career Network © 2001 - 2011 Beyond.com, Inc.